Manuals and instructions for everything

why does my d link router keep losing connection

Wi-Fi connections can easily drop when the connected device is located near the edge of your network s wireless signal range. The further away you get, the more unstable a Wi-Fi connection can get. Relocating your devices closer to your router is one way to solve this issue but isn t always possible. Upgrading your router to one that is more powerful can definitely help but you can also add a
to your network, which will boost your wireless range/strength and is compatible with any make of router. You router isn t the only device in your house emitting a signal. Several household items like Bluetooth devices, microwaves, TVs and cordless phones are pumping out radio signals that can interfere with your Wi-Fi network signal when they are in use. Moving your router away from devices like these is an easy solution but if for some reason youP to put your router next to your microwave, we suggest changing some of your devices Wi-Fi radio settings.

Upgrading to a dual band router like the, gives you the ability to connect your devices to the standard 2. 4GHz or the less crowded 5GHz band (if compatible) which can decrease much of the interference. Welcome! What Hardware version is your router? Look at sticker under router. What version is currently loaded? Found on routers web page under status. What region are you located? Are you wired or wireless connected to the router? What ISP Service do you have? Cable or DSL? What ISP Modem do you have? Stand Alone or built in router? What ISP Modem make and model do you have? If this modem has a built in router, it s best to bridge the modem. Having 2 routers on the same line can cause connection problems. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192. 168. 0. # address in the WAN IP address field, then the modem is not bridged.

Turn off ALL QoS or Disable Traffic Shaping (DIR only) GameFuel (DGL only and if ON. ) options. Advanced/QoS or Gamefuel. Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual. Turn on DNS Relay under Setup/Networking. Setup DHCP reserved IP addresses for all devices ON the router. Setup/Networking Ensure devices are set to auto obtain an IP address. Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall. Enable uPnP and Multi-cast Streaming under Advanced/Networking. What wireless modes are you using? Under Setup/Wireless/Manual. Try single mode G or mixed G and N? Channel Width set for Auto 20/40Mhz or try 20Mhz only.

Try setting a manual channel to a open or unused channel. What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don t support AES, so you might want to try TPIK only or Auto. What wireless devices do you have connected? Any cordless house phones? Any other WiFi routers in the area? Use to find out. Turn off Short GI, WLAN Partition and Extra Wireless Protection if you have it. Under Advanced/Advanced Wireless. Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic. Turn off all devices accept for one wired PC while testing. Check cable between Modem and Router, swap out to be sure. Cat6 is recommended.

  • Views: 46

why does my dlink router keep losing connection
why does my dlink router keep disconnecting wireless
why does my dlink router keep disconnecting
why does my d link wireless keep disconnecting
why does my computer not connect to my wireless router
why does my computer keep disconnecting from my wireless network
why do you need a router and a modem