why do they put sand on golf greens
There are a variety of maintenance practices used to provide desirable playing conditions on golf course putting greens, with sand topdressing being one of the more common practices. Sand topdressing also is one of the more misunderstood practices among golfers, who feel that sanded greens play poorly. Understanding the benefits of sand topdressing may help reduce golfer frustration when they see the Бsilver sheenБ on greens during their next round of golf. The benefits of topdressing include:
Improved Smoothness Б Voids exist within the turf canopy between turfgrass leaves and stems, causing inconsistent ball roll. Sand topdressing helps fill these voids to provide smoother and truer putts. Thatch Dilution Б The layer of organic debris, stems, crowns and roots in the upper rootzone Б i. e. , thatch Б can become concentrated and encourage mower scalping and localized dry spots. Thatch should be diluted with sand through practices like verticutting and sand topdressing to maintain good turf quality. Improved Turf Recovery Б Occasional turf thinning can occur on putting greens. Sand helps cushion leaf tips and crowns and reduces algae. Increased Firmness Б Turf produces organic matter in the upper rootzone that creates soft, spongy playing conditions. Regular sand topdressing, along with core aeration, improves surface firmness and resiliency. Improved Rootzone Б Sand drains well and resists soil compaction.
The accumulation of sand from multiple topdressings over many years can improve soil physical properties. The amount of sand applied depends on the time of year and growth rate of the turfgrass. At courses with bermudagrass putting greens, more sand is applied during summer when the turf is actively growing; however, lighter rates of sand also may be applied during cooler months. Putting greens in the Deep South are topdressed with sand all year but generally are only БdustedБ with lighter sand rates when turf growth slows as soil temperatures decrease. Source: Todd Lowe ( Southeast Region Agronomists: John H. Foy, regional director Б Chris Hartwiger, director, USGA Course Consulting Service - Patrick M OБBrien, agronomist Б Todd Lowe, agronomist Б When I teach about turfgrass maintenance, much of the discussion involves putting greens or other highly trafficked turf areas, because that is where most of the shots are played. And I am invariably asked questions about the type of sand to use, whether river sand can be used, or what type of amendments should be mixed with sand, and so on. These are important questions, and I have six things that I usually talk about when these questions are raised. 1. Sand is a terrible medium for plant growth because sand has a low water holding capacity and low nutrient content. Plants, including turfgrasses, will generally grow better in soils containing some silt and clay than they will in sand.
Of course, with regular maintenance, turfgrass managers are able to produce excellent turf in sand rootzones through the provision of water and nutrients to meet the plant requirements. 2. However, a sand can be chosen that has two especially useful characteristics for high traffic turf areas. With the right particle size distribution, sands can be used that have a) a rapid infiltration rate, so that the surface is usable soon after a heavy rain, and b) resistance to compaction, even though there is a lot of traffic on the area. Infiltration rate and resistance to compaction Б those are the reasons sands are used for high traffic areas. 3. There are very specific recommendations for putting green construction provided by the USGA. This document, USGA Recommendations for a Method of Putting Green Construction, is freely available ( ). These are sometimes called the БUSGA specificationsБ and they outline everything from the depth of sand to the type of drainage to the sand particle size and various physical properties that the sand must have if the green is to meet the specifications set out in the USGA Recommendations document. Make variations from these Recommendations, and the green may still perform well, but please donБt call it a БUSGAБ green if the Recommendations are not followed. 4.
For topdressing sands, a good starting point is to look for sands that have physical properties that meet USGA Recommendations. 5. I donБt think the Method outlined in the USGA Recommendations is necessarily the best way to build a green, but it is one that works, and it is a way to build a green that many people understand and know how to manage. Figure 1 shows the construction of a USGA green in Krabi, Thailand in 2006, and Figure 2 shows the same green still performing well in 2014. That type of predictable result is what we expect when building a green to USGA Recommendations. 6. If I were building a putting green for myself, and if I knew that I would be the one to manage it, I would probably build a green with some soil in it, with lots of surface drainage, with a slower infiltration rate than in the USGA Recommendations. But if I were building a green for someone else, and I knew that I would not be responsible for maintaining it, I would choose the USGA Recommendations. That way, the risk of unexpected problems is much reduced. I encourage everyone to download a copy of the and to be familiar with the document. Many problems and confusions could be avoided by a broader understanding of this Method. I wrote this as part of a series for the (IGIA) newsletter. For more about turfgrass information specific to India, see the ATC site.
- Views: 23
why does my golf swing slice right
why does my lawn have brown spots in it
why does a camel called the ship of the desert
why does bermuda grass turn brown after mowing
why do you need to aerate your lawn
why do they put sand on golf greens
why do plants grow better in soil than sand